All supply and return runs
We clean every supply register and every return grille in the home, plus the main trunk line. On a typical Murphy three-bedroom that is 12 to 18 openings. Nothing gets skipped because it is hard to reach.
Every residential Airduct cleaning Murphy TX visit covers the full air side of your system, not just the visible registers. Here is what comes standard, and what we quote separately if your home needs it.
We clean every supply register and every return grille in the home, plus the main trunk line. On a typical Murphy three-bedroom that is 12 to 18 openings. Nothing gets skipped because it is hard to reach.
A negative air machine holds the whole duct system under suction for the duration of the job. That is what keeps loosened debris out of your living room. We also cover every register before we start.
We clean the coil with coil cleaner and clear the condensate drain pan. A dirty coil restricts airflow and causes most of the musty smells we get called about in Murphy. It is included, not an add-on.
You see before and after footage on our monitor during the visit. If a run still looks dirty, we clean it again. This is the only way to know the job was actually done.
We install a fresh HEPA-rated filter sized to your system and reseal any access points we opened with mastic and duct sealant. That keeps the clean ductwork from pulling attic or garage air back in.
residential Airduct cleaning Murphy TX is a source-removal process that pulls settled dust, pet dander, mold spores, and construction debris out of your supply and return ductwork, then seals the system so it stays clean. We do not just vacuum the registers and call it done. Every branch line gets a rotary brush and air whip run through it while a negative air machine holds the whole system under suction, so loosened debris travels to the HEPA vacuum instead of into your living room.
Murphy homes deal with two duct problems most of the year: heavy spring pollen that rides in through the return, and summer humidity that feeds mold growth inside insulated flex duct. If you have noticed musty odors, excess dust from vents, or allergy flare-ups that get worse when the system runs, home duct cleaning in Murphy Texas is usually the fix. We also handle residential duct cleaning Murphy 75094 calls for post-renovation dust and clogged dryer vents that push lint into the duct run.
Most Murphy homes take two to four hours from arrival to walkthrough. Here is exactly what happens, in order, so you know what to expect when our truck pulls up.
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Negative air machine
Holds the entire duct system under negative pressure during cleaning so loosened debris travels to the vacuum instead of into your living space. Every truck carries one.
HEPA vacuum
Captures the dust, dander, and mold spores we pull out of the ductwork. HEPA filtration traps particles down to 0.3 microns, which is what keeps the air in your home clean during the job.
Rotary brush and air whip
Mechanical agitation tools that break debris off duct walls. The rotary brush handles sheet metal duct, and the air whip reaches into flexible duct without damaging the liner.
Duct camera
Lets us see inside the trunk and branch lines before and after cleaning, and lets you see it too. This is how we verify the job and catch torn flex duct or rodent entry.
Compressed air nozzle
Reaches corners and seams a brush cannot touch. We use it on the plenum and around the coil cabinet where debris tends to pack in.
Duct fogger
Applies an EPA-registered sanitizer as a fine mist across the duct surfaces after cleaning. We use it when the camera shows organic growth, not as an automatic add-on.
NADCA ACR source removal standard
The NADCA ACR standard is the industry benchmark for duct cleaning, and it is what we follow on every job: negative pressure containment, mechanical agitation of the full duct surface, HEPA filtration, and post-clean verification. It is the difference between a real clean and a surface pass.
Camera-verified before and after
We run the duct camera before we start and again when we finish, and you watch both on our monitor. If a run still shows debris, we clean it again before we pack up. No other verification method holds up the way footage does.
Coil and blower service as standard
Cleaning the ducts without cleaning the coil leaves the source of most musty odors in place. We clean the evaporator coil with coil cleaner, wipe the blower housing, and clear the condensate pan as part of every full-system job.
Sealing after cleaning
We reseal every access point we open with mastic and duct sealant, and we flag any disconnected joints or torn flex duct we find. A clean system that leaks attic air is not actually clean for long.
01
What we do: We run a duct camera through the trunk and a few branch lines first, then show you what we find. If the ducts are clean, we tell you so and do not sell you a clean you do not need. If they are not, we clean the full system the same visit.
→ You start ownership knowing exactly what is in your ductwork and when it was last serviced, with footage to prove it.
02
What we do: post construction duct cleaning is the right call here. Construction dust is abrasive and hard on blower motors, so we clean every run, wipe the blower housing, and replace the filter with a fresh HEPA unit.
→ The fine white dust stops appearing on your surfaces, and your blower is not grinding through abrasive debris every time it runs.
03
What we do: That smell is dust that collected on the heat exchanger over the cooling season. We clean the furnace and the duct system together so the first cold snap does not burn that layer off into your house.
→ You can run the heat without the smell, and the furnace is not fighting a dust blanket on the exchanger.
04
What we do: air duct cleaning for pet hair targets the fine undercoat that slips past standard filters and mats onto duct walls. We clean the full system and set you up with a MERV 11 filter that catches more of it going forward.
→ Less hair on the grille, less dander in the air, and a longer interval before the next clean is needed.
Murphy sits in Collin County, and the local climate drives most of what we see. Spring pollen loads are heavy here, and the return line pulls that pollen straight into the duct system. Then summer humidity arrives, and any duct run that passes through an unconditioned attic becomes a condensation risk, which is where mold growth in ductwork starts. Most Murphy housing stock was built between the mid-1990s and the 2010s, so we work on a mix of sheet metal duct in older sections and flexible duct in newer builds. Flex duct is more prone to sagging and tearing, and we find crushed runs in attics more often than homeowners expect. If you have been searching residential Airduct cleaning Murphy TX near me and putting it off, the pollen and humidity cycle is exactly why the job matters here. We schedule most Murphy cleans in two to four hours and always verify with a duct camera before we leave.
Timber Creek
Mostly 1990s construction with sheet metal trunk lines and original flex branches. We often find sagging runs in the attic that need re-supporting before cleaning.
Maxwell Creek
Larger two-story homes with two HVAC zones. These jobs take closer to four hours because there are two full systems and 18 to 22 openings to clean.
The Reserve
Newer builds with tight flex duct layouts. Post-construction dust is common here, and we recommend a clean after any major remodel or landscaping work.
Downtown Murphy
Older homes with retrofitted duct systems. We frequently find disconnected joints and gaps at the plenum that need sealing after cleaning.
Heavy spring pollen in Collin County
Pollen rides in through the return and settles on duct walls. We recommend cleaning in late spring or early summer after the pollen peak, so you are not cleaning and then immediately re-contaminating.
Summer attic temperatures above 130 degrees
Duct runs through a hot attic lose cooling capacity and can sweat where insulation is compromised. We inspect insulation condition on every job and flag runs that need re-wrapping.
Winter heating cycles that burn off summer dust
Dust collects on the heat exchanger all cooling season. The first heat cycle burns it off and pushes that smell through the house. A fall clean prevents it.
Most of our Murphy calls come down to four problems. Here is what each one looks like, what happens if you leave it, and how we handle it.
Problem
That dust is the same debris your family breathes all day. It also coats your coil and blower, which makes the system run longer and work harder every cycle.
Our Fix
We run a rotary brush and air whip through each branch line under negative pressure, pulling the reservoir out with a HEPA vacuum. Most customers see the dust on their furniture drop noticeably within the first week after the clean.
Problem
That smell usually means mold growth in ductwork or on a wet evaporator coil. Left alone, it spreads through the system and gets pushed into every room in the house.
Our Fix
We find the moisture source first, clean the coil and affected runs, then fog the duct surfaces with an EPA-registered sanitizer. We also tell you what caused the moisture so it does not come straight back.
Problem
Pet dander, pollen, and mold spores settle in duct walls and get re-released every time the blower runs. For allergy sufferers, the house can be worse than the outdoors.
Our Fix
Air duct cleaning for allergies removes the source, not just the airborne particles. We clean the full system, then recommend a HEPA filter with the right MERV rating for your equipment so the improvement holds.
Problem
Debris on duct walls and a clogged coil restrict airflow. Your blower runs longer to hit the thermostat setpoint, and that shows up on your electric bill every month.
Our Fix
Clearing the restriction lets the system move air the way it was designed to. We also check for crushed or disconnected flex duct, since a torn run in the attic can waste more energy than dirty duct walls ever will.
Clean ductwork changes three things you can measure: the dust on your shelves, the air your family breathes, and how hard your HVAC system has to work to move air. Here is what Murphy customers notice most after we finish.
Less dust on surfaces
A dirty return line recycles the same dust through your house all day. Once we pull that reservoir out with a HEPA vacuum and negative air machine, most Murphy homeowners report noticeably less dust on furniture and ceiling fans within the first week. One Timber Creek customer cut her dusting from twice a week to once every ten days.
Easier breathing indoors
Pet dander, pollen, and mold spores settle in ductwork and then get pushed back into bedrooms and living rooms. Air duct cleaning for allergies is one of our most requested services in Murphy for exactly that reason. Removing the source, not just filtering the air, is what makes the difference for people who wake up congested.
Lower energy bills
When duct insulation and sheet metal duct interiors are caked with debris, your blower fights restricted airflow and runs longer to hit the thermostat setpoint. Clearing that restriction is one of the few HVAC improvements that shows up on your electric bill. Murphy customers on older single-speed systems tend to see the biggest change.
No more musty odors
That smell when the AC first starts is usually mold growth in ductwork or a wet evaporator coil. We clean the coil, fog the duct run with an EPA-registered sanitizer, and verify with a duct camera. If we find active mold, we tell you what caused the moisture and how to stop it from coming back.
Google ★★★★★4.9
Showed up on time, laid drop cloths, and walked me through the camera footage before and after. Found a crushed flex duct in my attic I did not know about and quoted the repair separately. No pressure, no upsell. This is how a service call should go.
Yelp ★★★★★4.8
Booked same-day after our home inspection flagged the ductwork. They were at the house by 2pm and finished in under three hours. The report they left was detailed enough for our realtor to include in the file. Highly recommend for anyone buying in Murphy.
BBB ★★★★★4.9
Third company I called and the only one that actually explained what source removal means. The musty smell in our Maxwell Creek house is gone. They also told me my filter was the wrong size, which no one else caught in six years.
Real answers to the questions we hear most often from local homeowners and property managers.
Our local Airduct cleaning crews work Murphy and the surrounding Collin County neighborhoods every week, so we know the duct layouts common to Timber Creek, Southgate, and Murphy Farms. That means less guesswork on setup and a faster, cleaner job for you.
View local Airduct cleaningIf you searched Airduct cleaning near me and landed here, you are in the right place. We dispatch from Murphy and reach most addresses in town within 30 minutes. Same-day slots are usually available if you call before noon.
View Airduct cleaning near meWater intrusion, a burst flex duct, or a failed AC during a July heat wave does not wait for business hours. Our 24/7 Airduct cleaning line stays open for Murphy homeowners who need help fast. Call (855) 948-0345 any time.
View 24/7 Airduct cleaningNeed Same Day Airduct cleaning before a home inspection or a move-in? We hold afternoon slots for exactly that. Call early, tell us your square footage, and we will confirm a window within the hour.
View Same Day Airduct cleaningEmergency Airduct cleaning covers the situations that cannot wait: mold discovered after a roof leak, rodent contamination in the duct run, or smoke odor after a kitchen fire. We contain, clean, and sanitize the same day whenever possible.
View Emergency Airduct cleaningWe also handle commercial Airduct cleaning for Murphy restaurants, offices, and retail spaces along the Parker Road Corridor and Murphy Marketplace. Same source-removal standard, scheduled around your business hours so you do not lose a day of operation.
View commercial Airduct cleaningCall (855) 948-0345 or email [email protected] and we will get back to you fast. Our phones are answered 24/7 for emergencies, and regular scheduling runs Monday through Friday, 8 a.m. to 6 p.m. If you are in Murphy, we can usually get a tech to your door the same day.
Phone
(855) 948-0345Address
410 W Farm to Market 544, Suite 102 Murphy, TX 75094 USA, Murphy, Texas
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available